User Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Cleaning and Transporting Your Scanner
- Solving Problems
- Technical Specifications
- Notices
12. Set the connection mode switch on the scanner to Wi-Fi.
13. Turn on the scanner.
When the ready and Wi-Fi lights on the scanner stay on, the connection is established.
14. Set up network scanning on your computer.
Parent topic: Connecting to an Existing Wi-Fi Network
Related concepts
Direct Wi-Fi Mode Setup
Related references
Connection Mode Switch
Related tasks
Setting Up Network Scanning
Setting Up Network Scanning
After manually configuring your scanner to connect to your network, you must set up the computer to
connect to the scanner using the Epson Scan Settings utility. Your scanner must be turned on and
connected to the network.
Note: Make a note of the IP address or host name of the scanner so you can enter it in these steps.
1. Do one of the following to start Epson Scan Settings:
• Windows 8.x: Navigate to the Apps screen and select EPSON Scan Settings.
• Windows (other versions): Click or Start > All Programs or Programs > EPSON > EPSON
Scan > EPSON Scan Settings.
27