User Manual

Manual Network Connection Setup
If the software installation process did not result in a Wi-Fi connection between your scanner and a
router or access point, do the following to manually connect to a network:
1. Connect your scanner to your computer using a direct Wi-Fi connection.
2. Enter the network settings for your router or access point using EpsonNet Config.
3. Set up your computer to scan to the networked scanner.
Follow the links here for instructions on each procedure.
Parent topic: Wi-Fi Networking
Related tasks
Enabling a Direct Wi-Fi Connection
Manually Connecting to a Wi-Fi Router Using EpsonNet Config
Setting Up Network Scanning
24