Operation Manual
4. Load the envelope into the input tray facing down making sure that the opened edge (ap side) of the envelope
is facing to the side. For envelopes with the opened edge
(ap
side) on the shorter side, you can load the
envelope with the opened edge (ap side) facing up.
Slide the envelope into the ADF until they meet resistance and the Ready light becomes brighter.
c
Important:
Do not load envelopes with adhesives on them.
Note:
❏ Envelopes that are not opened by cutting sharply at the ap edge may not be scanned correctly.
❏ Envelopes that have not yet been sealed can be loaded with the ap open and facing up.
User's Guide
Specications of Originals and Placing Originals
40