Installation guide

32 Troubleshooting
EpsonNet Setup was unable to find my printer on the network
1. If you see a screen like this one, do one of the following:
■ If you connected the printer wirelessly, verify that the printer is turned on
and the WiFi icon appears on the printer’s control panel. Select
Wi-Fi
setup using the printer’s control panel
, then click Next.
■ If you connected the printer to your network with an Ethernet network
cable, verify that the printer is turned on and connected to your network.
Select
Wired Network (Ethernet) setup, then click Next.
■ If you created an Ad-Hoc wireless connection, do one of the following:
■ For Windows users: If your computer is connected to a network
with an Ethernet cable, disconnect it. When setup is complete,
reconnect your computer’s Ethernet cable.
■ For Macintosh users: If your computer is connected to a network
with an Ethernet cable, you cannot set up your printer this way. See
page 5 or page 23 to set up your printer.
■ If you’re switching from a wireless to a wired network connection, you
need to disable the wireless adapter using the printer’s control panel.
Select
F Setup on the printer’s control panel, select Network Settings >
Wireless LAN Setup > Advanced Setup > Disable Wireless LAN.
Select
Yes, then press OK.
2. Continue clicking
Next until EpsonNet Setup begins to search for your
printer. Then continue with step 9 on page 26.