Installation guide

12 Wireless Network Installation
11. Press u or d to select the security mode that your wireless network is using,
then press
OK.
Note:
If your wireless network doesn’t have security enabled, select None, then
press OK.
12. Do one of the following:
■ If your wireless network uses WPA or WPA2 as the security mode,
continue with “Select WPA Security Settings” on page 13.
■ If your wireless network uses WEP as the security mode, continue with
“Select WEP Security Settings” on page 14.
■ If your wireless network doesn’t have security enabled, continue with
“Confirm Your Network Settings” on page 15.