User's Guide

• Press a one-touch dial button to select one of the first five speed dial/group dial entries,

then press OK. Press the 1 key to enter another number, or press the 2 key to continue with

the selection made.

4. To change any of the fax settings, press Menu.

Fax Settings

• Quality: to increase the scanning resolution of the transmitted document.

• Contrast: to change the contrast of the transmitted document.

• Send Fax Later: to specify what time you want to send your fax. (You cannot send

another fax job until the delayed fax has been transmitted or cancelled.)

• Fax Mode: to select Sending or Poll to Receive mode. Use Poll to Receive mode to

receive a fax from another fax machine to which you have dialed (such as a fax

information service).

Press Menu when done selecting the settings.

5. Press the B&W or Color button to begin scanning your document.

To cancel faxing, press Stop/Clear Settings at any time.

Note:

If you use the group dial list, only B&W is available.

6. Depending on where you placed your original, the following happens:

• If you are faxing with the Automatic Document Feeder, your document is automatically

scanned and faxed.

• If you are faxing from the scanner glass, you see this screen after the first page is scanned:

If you need to fax additional pages, place your original on the scanner glass or in the

Automatic Document Feeder. Then press 1 to continue.

If you do not need to fax another page, press 2. Your document is faxed.

Note:

If the fax number is busy or there is some other connection problem, you see a redialing

screen and the fax number is redialed after one minute. Wait for the redial, or press Redial/

Pause to redial immediately.

When faxing is complete, you see this screen again:

Use Your Telephone to Dial the Number