User`s guide
❏ Make sure the paper size and paper type settings of the paper source are correct.
Related Information
& “Environmental Specications” on page 127
& “Available Paper and Capacities” on page 25
& “Paper Handling Precautions” on page 24
& “Loading Paper in the Rear Paper Feed” on page 26
& “Cleaning the Paper Path” on page 88
Original Does Not Feed in the ADF
❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
❏ Do not load above the line just under the
d
symbol inside the ADF edge guide.
❏ Check that the ADF icon appears on the control panel. If it does not appear, place the originals again.
Related Information
& “Available Originals for the ADF” on page 29
& “Placing Originals on the ADF” on page 29
& “Cleaning the ADF” on page 88
Power and Control Panel Problems
Power Does Not Turn On
❏ Hold down the
P
button for a little longer.
❏ Make sure the power cord is securely plugged in.
Power Does Not Turn O
Hold down the
P
button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P
button.
LCD Screen Gets Dark
e printer is in sleep mode. Press any button on the control panel to return the LCD screen to its former state.
User's Guide
Solving Problems
108