User`s guide
4. Remove the jammed paper
5. Raise the ADF input tray, and then remove the jammed paper.
6. Close the ADF cover.
Paper Does Not Feed Correctly
Check the following if the paper jams, paper feeds at a slant, several sheets of paper feed at a time, no paper feeds,
or paper is ejected.
❏ Place the printer on a
at
surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Load paper in the correct direction, and slide the edge guide against the edges of the paper.
❏ Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not load
above the line just under the
d
symbol inside the edge guide.
❏ When a paper out error occurs although paper is loaded in the printer, reload paper against the right edge of the
rear paper feed.
❏ Load one sheet of paper at a time when loading multiple sheets of paper.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the paper source before you reload the paper.
❏ Load and eject paper without printing to clean the paper path.
User's Guide
Solving Problems
107