User manual
X K 3 1 9 0C 602
Chapter 6 Control Process of
Quantitative Scale
I. Additive Scale
Please refer to Fig 6-1 for the function and meaning of setting parameters during the process and
the sequence order for controlling the input and output:
Figure 6-1 Working Sequence Drawing of Additive Quantitative Scale
The parameters instruction in the Figuret0Measurement delay of material feedt1 quick feed over delay
t2 Slow feed over delay (The indicator during the three periods will not judge the weight d1: Quantitative
value of material 1q1 Quick feed lead of material 1a1 Slow feed lead of materialo1 Allowance of
material 1LZero zone
Notes to working process of additive quantitative scale:
1. The Add Signal is needed before material feeding;
2. The Discharge Signal is needed during material discharging;
3. The condition that the weight should be less than zero value should be satisfied during the
process of closing the material discharging.