User manual

X K 3 1 9 0C 602
next parameter.
In the following parameters, the italic letters “ABCDEF” in “indicator display” represent that
the indicator displays the values of parameters A, B, C, D, E, and F at the same time. “*”, “**”,
“******”, and “**.**.**” represent that it only displays the value of one parameter. The lower
line in the indicator display shows the DOS prompt. In the DOS prompt, letter M is displayed as
“ ”, and letter W is displayed as “ “. “SET 1 parameter 13A” is the parameter A in
parameter number 13 in table 4-3.
Following is the introduction of parameter according to the group of parameters setting.
SET 0inquiry parameters
Refer to table 4-3 or 4-4 respectively according to the differentSET 1 parameters 13
A :
Table 4-1SET 0Parameter Table of Quantitative scale
(when SET 1parameter 13A is set as 0 or 1 in table 4-3)
P
arameter
Indicator
display
Parameter explanation Remarks
1
[**.**.**]
[dAtE ]
Current date setting
2
[**.**.**]
[tIME ]
Current time setting
If
time or date is
modified, it still shows
current parameter after
pressinginput
button,
or else, it will go to the
next parameter.
3
[******]
[n A]
Accumulated times
A—printing option
(0: no printing, 1: p
rinting
accumulative data, 2
: printing all
data in memory)
Not to be modified,
only for inquiry.
When A selects 1 or 2
,
pressinput
button to
start printing, press
stop
button to stop
printing.