EasyMP Network Projection Operation Guide
Contents Introduction to EasyMP Network Projection............................................................................................. 7 EasyMP Network Projection Features.................................................................................................. 7 Display Options .................................................................................................................................... 7 Multi-Screen Display Function...................................................
Profiles for Search .................................................................................................................... Performing a Profile Search ...................................................................................................... Making a Profile ........................................................................................................................ Managing a Profile .......................................................................................
Error Messages when Searching for and Selecting Projectors...................................................... 76 Error Messages when Projecting................................................................................................... 78 Event ID List ....................................................................................................................................... 78 Screen Summary ...............................................................................................
Copyright Notice .......................................................................................................................... About Notations ........................................................................................................................... General Notice............................................................................................................................. Copyright Attribution ......................................................................
Introduction to EasyMP Network Projection See the information here to learn more about EasyMP Network Projection software. EasyMP Network Projection Features Display Options Connection Modes EasyMP Network Projection Features You can use EasyMP Network Projection software to project images from your computer to the projector over a network.
Distribution Function Parent topic: Introduction to EasyMP Network Projection Multi-Screen Display Function You can project different images from up to four projectors that are connected to one computer. This allows you to project complex data, such as a business report, in an extra-wide landscape format. Parent topic: Display Options Related topics Projecting Images Using the Multi-Screen Display Function Movie Sending Mode You can play movies smoothly by sending movie files directly to the projector.
Presentation Mode You can project a PowerPoint slide show from your computer without displaying any other distracting computer content. While using Presentation Mode, a black screen is projected when the PowerPoint slide show is not playing. Parent topic: Display Options Related tasks Projecting Only a PowerPoint Slide Show Distribution Function You can project the same computer image simultaneously from up to four projectors connected to the same network.
Connection Modes You can use the following methods to connect a computer to a projector over a network by using EasyMP Network Projection. Quick Connection Mode Advanced Connection Mode Parent topic: Introduction to EasyMP Network Projection Quick Connection Mode You can connect the projector and the computer directly using wireless communication. This allows you to project the computer screen without making any complicated network settings.
Advanced Connection Mode You can connect the projector and the computer using an existing network system. To use Advanced Connection Mode, you need to connect the projector to an access point or to a network hub.
Setting Up EasyMP Network Projection for the First Time Follow these instructions before connecting a computer to the projector over a network. Installing the Software Setting Up the Projector Installing the Software Install EasyMP Network Projection from the EPSON Projector Software CD-ROM supplied with your projector (if available) or by downloading it from the Epson Web site.
Requirement Windows Mac Operating system Windows XP Mac OS X • Professional (32-bit) • 10.4.x (32-bit) • Home Edition (32-bit) • 10.5.1 or later (32-bit) • Tablet PC Edition (32-bit) • 10.6.x (32- and 64-bit) Windows Vista • 10.7.x (32- and 64-bit) • Ultimate (32-bit) • 10.8.x (64-bit) • Enterprise (32-bit) • 10.9.x (64-bit) • Business (32-bit) • 10.10.x (64-bit) • Home Premium (32-bit) (Mac OS X 10.4.11, 10.5.8, 10.6.8, 10.7.3, 10.8.0, 10.9.0, or 10.10.
Requirement Windows Mac CPU Mobile Pentium III 1.2 GHz or faster Power PC G3 900 MHz or faster (Pentium M 1.6 GHz or faster recommended) (CoreDuo 1.
4. If the installer does not start automatically, open the CD-ROM drive from My Computer (or Computer), and then double-click InstallNavi.exe or EMP_NSCInst.exe. 5. Follow the on-screen instructions to install. Parent topic: Installing the Software Installing EasyMP Network Projection (Mac OS X) Install EasyMP Network Projection on your computer. 1. Turn on your computer. 2. Make sure all running applications are closed. 3.
Depending on your projector, some connection methods may not be available. See the User's Guide supplied with the projector for more details. • To connect the projector to the computer directly using wireless communication: Use Quick Connection Mode. • To connect the projector to the computer using a wireless network system: Use Advanced Connection Mode.
Use Advanced Connection Mode. Parent topic: Setting Up the Projector Related tasks Setting Up a Projector to Connect in Quick Connection Mode Setting Up a Projector to Connect in Advanced Connection Mode (Wireless) Setting Up a Projector to Connect in Advanced Connection Mode (Wired) Setting Up a Projector to Connect in Quick Connection Mode To connect a computer directly to the projector using wireless communication, you need to select network settings on the computer and the projector. 1.
A screen like one of the following is displayed. 6. Select On for Wireless LAN Power. 7. Select Quick for Connection Mode. 8. Select other options as necessary for your network. See the User's Guide supplied with the projector for more details. 9. Select security settings on the Security menu as necessary for your network. Check with your network administrator for more information on making the correct settings. 10.
3. Install the wireless LAN unit in the projector, if necessary. See the User's Guide supplied with the projector for more details. 4. Turn on the projector. 5. Press the Menu button on the remote control or the control panel, select the Network menu, and then select Network Configuration. 6. Select Wireless LAN. A screen like one of the following is displayed. 7. Select On for Wireless LAN Power.
Setting Up a Projector to Connect in Advanced Connection Mode (Wired) To connect a computer to the projector using a wired LAN, you need to select network settings on the computer and the projector. 1. Contact your network administrator and check that DHCP is available under the current network environment. Note: If DHCP is not available, write down the following values that are available for your projector. • IP Address • Subnet Mask • Gateway Address 2. Connect the computer to the network.
7. Select IP settings as necessary. • DHCP is available: Set DHCP to On. • DHCP is not available: Set DHCP to Off and enter the projector's IP Address, Subnet Mask, and Gateway Address values as necessary. 8. When you have finished making settings, select Setup Complete or Complete, and follow the onscreen instructions to save your settings and exit the menus.
Connecting to the Projector and Projecting Images Follow these instructions to connect the computer and the projector over a network, and to project images from your computer's screen using the projector. Make sure you have already set up EasyMP Network Projection and selected a connection mode for the projector.
1. Press the LAN button on the remote control. The LAN standby screen is projected. 2. Start EasyMP Network Projection. • Windows XP, Windows Vista, and Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Network Projection, and then click EasyMP Network Projection Ver.X.XX. • Windows 8.x: Navigate to the Apps screen and select EasyMP Network Projection Ver.X.XX. • Mac OS X: Double-click EasyMP Network Projection from the Applications folder.
3. Select Quick Connection Mode, and then click OK. The projector search results are displayed. 4. If the projector you want to connect to is not displayed in the search results, search for it using one of the following methods. • Automatic Search: Searches for the projector automatically. • Manual Search: Searches for the projector based on the SSID selected from a list. • Profile: Searches for the projector based on a previously saved profile. 5.
• Windows Vista, Windows 7, and Windows 8: Enter the keyword displayed on the LAN standby screen, and then click OK. When the following dialog box is displayed, enter the passphrase set on the projector, and then click Connect. Note: If you select Save the passphrase and don't show this dialog box again, the projector's SSID and passphrase are saved on the computer and this dialog box is not displayed the next time you connect. You do not have to enter the passphrase again.
When a connection is established, the computer screen is projected. The following EasyMP Network Projection toolbar is displayed on the computer screen. Note: When a connection is established, the input source for the projector automatically switches to the LAN source if no other signal is being input. If the input source does not automatically switch to the LAN source, press the LAN button.
The LAN standby screen is projected. 2. Start EasyMP Network Projection. • Windows XP, Windows Vista, and Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Network Projection, and then click EasyMP Network Projection Ver.X.XX. • Windows 8.x: Navigate to the Apps screen and select EasyMP Network Projection Ver.X.XX. • Mac OS X: Double-click EasyMP Network Projection from the Applications folder. 3. Select Advanced Connection Mode, and then click OK.
The projector search results are displayed. 4. If the projector you want to connect to is not displayed in the search results, search for it using one of the following methods. • Automatic Search: Searches for the projector automatically. • Manual Search: Searches for the projector based on a specified IP address or projector name. • Profile: Searches for the projector based on a previously saved profile. 5. Select the projector you want to connect to, and then click Connect.
Note: Make sure you connect a computer to the network. 1. Press the LAN button on the remote control. The LAN standby screen is projected. 2. Start EasyMP Network Projection. • Windows XP, Windows Vista, and Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Network Projection, and then click EasyMP Network Projection Ver.X.XX. • Windows 8.x: Navigate to the Apps screen and select EasyMP Network Projection Ver.X.XX.
3. Select Advanced Connection Mode, and then click OK. The projector search results are displayed. 4. If the projector you want to connect to is not displayed in the search results, search for it using one of the following methods. • Automatic Search: Searches for the projector automatically. • Manual Search: Searches for the projector based on a specified IP address or projector name. • Profile: Searches for the projector based on a previously saved profile. 5.
Note: When a connection is established, the input source for the projector automatically switches to the LAN source if no other signal is being input. If the input source does not automatically switch to the LAN source, press the LAN button.
If the projector you want to connect to is not found automatically, you can search for the target projector by specifying the SSID, IP address, or a projector name. By using Advanced Connection Mode, you can search for projectors at remote locations on a different subnet. • Searching for Network Projectors Using a Profile You can save network projector information as a profile, and then specify the profile to search for the same projector instead of providing projector details each time you search.
Related concepts Search Methods Related tasks Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name Performing a Profile Search Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name If the projector you want to connect to is not found automatically, you can search for the target projector by specifying the relevant details. In Quick Connection Mode, you can search for the projector by using an SSID.
2. Specify one of the following items, and then click OK. • Quick Connection Mode: Select the SSID for the projector you want to connect to from the list. • Advanced Connection Mode: Enter the IP address or the projector name for the projector you want to connect to. The search results are displayed.
Profiles for Search Performing a Profile Search Making a Profile Managing a Profile Parent topic: Selecting the Projector Search Method Profiles for Search You can save information for a network projector as a profile. A profile is a file containing all of the projector's information, such as the projector name, IP address, and SSID. By using a profile, you can easily search for saved projectors instead of providing projector details.
2. Select the projector you want to connect to from the list. The search results are displayed. Parent topic: Searching for Network Projectors Using a Profile Making a Profile After searching for a projector, you can save the projector details as a profile using a memorable name that you can search for easily later. 1. While the projector is displayed on the following screen, click Save in the profile.
2. Enter a Profile name, and then click Add. 3. Perform the following operations as necessary. • An overwrite confirmation screen is displayed: If you are prompted to confirm whether or not you want to overwrite, select Save as to save a profile with a different name. • A folder selection screen is displayed: If you have created a folder for profiles, one of the following screens is displayed. After entering the Profile name and selecting the Save in destination, click Add.
Windows: Mac OS X: 38
The projector information is saved in the profile. Parent topic: Searching for Network Projectors Using a Profile Managing a Profile You can change the name and the organization of your profiles. 1. Click Set options on the following screen. The Set options screen is displayed.
2. Click Edit profile. The Edit profile screen is displayed.
3. Edit the profiles as necessary. 1 Displays the profiles. You can drag and drop profiles and folders to change the folder structure. 2 Duplicates the profile. The copied profile is saved in the same folder as the original with the same name. 3 Deletes the profile and the folder. 4 Displays the Rename dialog box to rename the folder or the profile. You can enter up to 32 characters in the Rename dialog box. 5 Exports the profile. Exported profiles can be used as backup files.
8 Displays the projectors saved in the profile. To delete a specific projector from the profile, select the projector and then press the Delete button. When all projector information has been deleted, the profile is also deleted. 4. Click OK. Your edits are saved and the Edit profile screen closes. Parent topic: Searching for Network Projectors Using a Profile Controlling the Projected Display Follow these instructions to use the toolbar to control the screen being projected.
2. If you are connected to multiple projectors, click the projector you want to control. button on the toolbar and select the 3. Perform one of the following operations. • Stop: Click the button on the toolbar. The projected image stops. A black screen is projected while stopped. • Pause: Click the button on the toolbar. The projected image pauses. The paused image is projected. • A/V Mute: Click the that is displayed.
1. Make sure the toolbar display is set to Full. 2. If you are connected to multiple projectors, click the projector you want to control. 3. Click the button on the toolbar and select the button on the toolbar. 4. Perform one of the following operations. • Switch to a computer source: Click the • Switch to a video source: Click the button. button. Parent topic: Controlling the Projected Display Finishing Projecting Images You can finish projecting images by using the toolbar.
Using Additional Functions Follow these instructions to use additional EasyMP Network Projection functions that may be useful during a meeting or presentation.
1. Make sure the toolbar display is set to Full. 2. If you are connected to multiple projectors, click the projector you want to control. 3. Click the button on the toolbar and select the button on the toolbar. 4. Run the PowerPoint slide show on your computer. The PowerPoint slide show is projected. 5. To stop Presentation Mode, click the button again. Parent topic: Using Additional Functions Projecting Movies You can project movies smoothly by using Movie Sending Mode.
Supported Movie Files The following movie file types are supported. Note: You cannot project files protected by digital rights management (DRM). File Type (Extension) Movie Codec Audio Codec Recording Quality .mpg MPEG-2 MPEG-1 Layer 1/2 Maximum frame rate: 30 fps .mpeg .mp4 .wmv You can play MPEG contents without audio. Linear PCM and AC-3 are not supported. MPEG-4 ASP MPEG-4 H.264/MPEG-4 AVC AAC-LC WMV9 WMA Maximum resolution: 1280 × 720 .
1. Make sure the toolbar display is set to Full. 2. Click the button on the toolber. The projector selection screen is displayed. 3. Select the projector, and then click OK. The Movie Sending Mode screen is displayed.
4. Click Select File. 5. Select the movie file you want to play, and then click Open.
The Movie Sending Mode screen is displayed again. The selected file is displayed in the Movie file list. If you click Select file again, the Movie file list currently displayed is cleared, and then only the files you select later are displayed in the list. 6. Control movie play back using the Movie Sending Mode screen. 1 Displays the current point in the movie file. You can drag and drop the slider to the point where you want to start playing. 2 Plays the file. 3 Pauses play back. 4 Stops play back.
Multi-Screen Display Examples Setting Up Multi-Screen Display Parent topic: Using Additional Functions Multi-Screen Display Examples By using the multi-screen display function, you can project images in the following display arrangements. Note: • For Windows, you can set virtual display drivers and project each image from the projector. Virtual display drivers are not available for Windows Vista, Windows 7, Windows 8, and Windows 8.1.
If you want to project two different images from your computer to two projectors, you can assign the additional display as shown below.
If you want to access two different images or views on your computer but project only one image to the projector, you can assign the additional display as shown below. 1 Actual monitor image: PowerPoint file presenter tools 2 Additional display image: Slide show using a PowerPoint file Parent topic: Projecting Images Using the Multi-Screen Display Function Setting Up Multi-Screen Display Follow these instructions to set up multi-screen display.
Arranging the Multi-Screen Display (Mac OS X) Projecting Images to the Arranged Multi-Screen Display Parent topic: Projecting Images Using the Multi-Screen Display Function Enabling the Virtual Display Driver (Windows) Before using the multi-screen display function, you need to enable the virtual display driver for Windows. Note: If you have already enabled the virtual display while installing EasyMP Network Projection, you do not need to enable it again. 1.
The virtual display drivers are enabled and the display may flicker. When the procedure is complete, the Add-Remove Virtual Display screen closes. Note: If the virtual display driver has been enabled so that the mouse pointer can be moved outside the limits of the screen, there may be occasions when you lose track of the location of the pointer.
5. Select Use multi-display.
Display layout and Display properties options are added at the bottom of the screen. 6. Click Display properties.
The Display Properties screen is displayed. 7. Click the Settings tab.
8. Drag the displayed monitor icon and place it where you want the additional image to appear. In the following example, the actual monitor (1) is placed on the left, while the additional monitor (3) is placed on the right. Note: • When the PC has multiple display output terminals, the numbers assigned to the virtual terminals are sequential to those of the physical terminals. • When an external monitor is connected as a secondary monitor, the image for that screen cannot be projected.
When the monitor icons have been arranged, displays are connected as shown in this image. 9. Click OK to close the Display Properties screen. Parent topic: Setting Up Multi-Screen Display Arranging the Multi-Screen Display (Mac OS X) You can arrange the position of each display. 1. Connect an external monitor to the computer. 2. Check the following items when connecting over a wireless LAN and modify the settings as necessary.
5. Select Use multi-display. Display layout and Display preferences options are added at the bottom of the screen.
6. Click Display preferences. The Display setting screen is displayed. 7. Click Arrangement.
8. Clear Mirror Displays. 9. Drag the displayed monitor icon and place it where you want the additional image to appear. 10. Close the Display setting screen.
Projecting Images to the Arranged Multi-Screen Display After setting up multi-screen display, you can assign the images you want to project to each screen. 1. Open the file you want to project. 2. Drag the window to the desired display, and assign where the image is to be projected. 3. Select the projector and the number you want to assign from Display to set which image you want to project from which projector.
4. Click Connect. The image assigned to each projector is projected. Note: If you use a virtual display on Windows, you cannot view the image being sent to a virtual display on the computer. To adjust the image on the virtual display, check the projected image.
perform mouse-based operations on the virtual display, move the mouse pointer in the direction of the virtual display so that the pointer appears on the virtual display. 5. To end projection for multi-screen display, click Disconnect on the toolbar. Parent topic: Setting Up Multi-Screen Display Projecting One Computer Screen from Multiple Projectors You can project one computer screen from up to four projectors simultaneously.
The same image is projected from multiple projectors.
Solving Problems See the following sections to check for solutions to problems you may have using EasyMP Network Projection. Solving Network Connection Problems Solving Problems During Projection Error Messages List Event ID List Solving Network Connection Problems Try these solutions depending on your network environment.
• Set DHCP to Off. Go to Network > Network Configuration > Wireless LAN > DHCP or Network > Network Configuration > Wireless LAN > IP Settings > DHCP. • Set Wireless LAN Power to On. Go to Network > Network Configuration > Wireless LAN > Wireless LAN Power. • When you enable the security setting, set the same passphrase to the computer and the projector. • Close network settings on the projector, and then return to the LAN standby screen. • Check the computer's network settings.
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wireless) When you cannot connect the computer and the projector using Advanced Connection Mode over a wireless network, try the following solutions. If you cannot resolve the problem, contact your network administrator. • Check the status of the external devices used for the network connection or the environment in which the network devices and the projector are located.
• Check the computer's network settings. • If the wireless LAN adapter is not installed on your computer, install a wireless LAN card on your computer. • Enable the wireless LAN setting or AirPort on your computer. • Connect to the access point to which the projector is connected. • Turn off the firewall. If you do not want to turn it off, register the firewall as an exception. Make the necessary settings to open the ports. The ports used by this software are "3620", "3621", and "3629".
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wired) When you cannot connect the computer and the projector using Advanced Connection Mode over a wired network, try the following solutions. If you cannot resolve the problem, contact your network administrator. • Check the status of the external devices used for the network connection or the environment in which the network devices and the projector are located. • Connect the network cable securely.
• If you cannot find the projector you want to connect to using Automatic search, select Manual search to specify the IP address. • If another user has established a connection and the projected image remains as it is, you can connect by interrupting the current connection. If a Projector Keyword is set for the projector but you do not know the keyword, restart the projector and check the keyword displayed on the LAN standby screen.
• If the PowerPoint slide show is not displayed where you want when using the multi-screen display function, use PowerPoint 2003 or later to make settings and use two or more virtual displays. Or, limit the number of displays to one before displaying the PowerPoint slide show.
• If the volume for the computer is set to the minimum while the projector volume is set to the maximum, the noise may be mixed. Turn up the computer's volume and turn down the projector's volume. Parent topic: Solving Problems During Projection Related references Set options - Audio Output Error Messages List When an error occurs, an error message is displayed on your computer screen. Check for your message and follow the instructions here to clear the error.
Error Messages Remedy EasyMP Network Projection initialization failed. Restart EasyMP Network Projection. If the message is still displayed, uninstall and then reinstall EasyMP Network Projection. Network adapter information could not be obtained. Check the following items. • A network adapter is installed on the computer. • The driver for the network adapter being used is installed on the computer. • The network adapter is enabled.
Error Messages Remedy Connection to the projector failed. Try connecting again. If you still cannot connect to the projector, check the network settings on the computer and the network settings for the projector. The keyword does not match. Re-enter the keyword displayed on the projector screen. Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword. Connection failed due to keyword mismatch. Enter the keyword displayed on the projector screen.
Installing EasyMP Network Projection (Mac OS X) Error Messages when Projecting Error Messages Remedy XXXXXX was disconnected. Try connecting again. If you still cannot connect to the projector, check the network settings on the computer and the network settings for the projector. To output audio from the projector, restart applications such as PowerPoint or Windows Media Player. Restart PowerPoint or Windows Media Player. Audio is then output from the projector.
Event ID Cause Remedy 04FE The network software ended unexpectedly. Check the status of network communications. Restart the projector. 04FF A system error occurred in the projector. Restart the projector. 0891 Cannot find an access point with the same SSID. Set the computer, the access point, and the projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match. Check that the wireless LAN security settings are correct. 0893 The WEP/TKIP/AES encryption type does not match.
Event ID Cause Remedy 0B01 The built-in storage could not be detected correctly. Perform Delete All Internal Data. When the internal storage is deleted correctly, plugin the power cord for the projector and turn it on. If it is not deleted correctly, contact Epson as described in your projector User's Guide. Go to Extended > Whiteboard Settings > Internal Storage. 0BFF An error has occurred in the Whiteboard function. Parent topic: Solving Problems 80 Restart the projector.
Screen Summary See these sections for more information about the EasyMP Network Projection screens. Select Connection Mode Screen Search and Connect Screen Profiles Set options Toolbar Movie Sending Mode Add-Remove Virtual Display Select Connection Mode Screen When you start EasyMP Network Projection, the select connection mode screen is displayed. 1 Select the connection mode. 2 Select to always connect using the selected connection mode.
Parent topic: Screen Summary Search and Connect Screen When you start EasyMP Network Projection and select a connection mode, one of the following screens is displayed depending on the connection mode you selected.
• When selecting Advanced Connection Mode 1 In Quick Connection Mode, searches for the projectors based on the SSID. Automatic search 2 In Advanced Connection Mode, searches for the available projectors on the network system to which the computer is connected. In Quick Connection Mode, searches for the projector by using the SSID. Manual search In Advanced Conncection Mode, searches for the projector by using an IP address or a projector name.
3 Status Indicates the status for detected projectors as shown below. Available. Standby Available. When you click Connect, the computer currently connected is disconnected and your computer is connected. Busy Cannot be selected. Disable interrupt connection is set on another computer that is already connected. Busy (Disable interrupt connection) Currently in use by another application The projector's Configuration menu is open.
7 Use multi-display Select when using the multi-screen display function. When this is selected, Display layout and Display properties (Display preferences) are displayed at the bottom of the screen. 8 Troubleshooting Displays the EasyMP Network Projection Troubleshooting screen. 9 Connect Connects to the projector you selected from the search results list. When a connection is made with a projector, a toolbar is displayed.
Profiles See these sections for more information about the screens for saving and managing profiles. Save in the profile Edit profile Parent topic: Screen Summary Save in the profile When you search for projectors and click Save in the profile on the search and connect screen, one of the following screens is displayed. • If no folder has been created.
• If you have created a folder for profiles. 1 Profile name Enter the profile name. 2 Save in Select the folder where you want to save the profile. 3 Add Registers the projector information in the profile.
Edit profile When you click Edit profile on the Set options screen, the Edit profile screen is displayed. 1 Profile Displays the profile. You can drag and drop profiles and folders to change the folder structure. 2 Copy Duplicates the profile. The copied profile is saved in the same folder as the original with the same name. 3 Delete Deletes the profile and the folder. 4 Rename Displays the Rename dialog box to rename the folder or the profile.
8 Projector name Displays the projector information saved in the profile. SSID or IP address Delete Deletes the selected projector from the profile. When all projector information is deleted, the profile is also deleted. Parent topic: Profiles Related tasks Making a Profile Set options When you click Set options on the EasyMP Network Projection search and connect screen, the Set options screen is displayed. Note: You can also access Set options by clicking the button on the toolbar.
Set options - General settings When you click the General settings tab on the Set options screen, the following screen is displayed. Use full-screen video transfer Windows XP only Plays back a movie file at full screen. If the projector does not support movie sending, this function cannot be set. Encrypt communications Select to encrypt and transmit data. Even if data is intercepted, it cannot be decrypted. When using Quick Connection Mode, make sure you always select this checkbox.
Make the movement of the mouse pointer smooth Use Easy Interactive Tools Windows XP/Windows Vista/Windows 7 only Select to prevent the mouse pointer from flickering when Transfer layered window is selected in Adjust performance. (If Windows Aero is selected as the theme for Windows Vista and Windows 7, this setting turns off Windows Aero.) Select to use Easy Interactive Tools with EasyMP Network Projection. This setting is synchronized with Transfer layered window in Adjust performance.
Restore Defaults Resets all adjustment values for Set options to their default settings, except for Edit profile and Switch LAN in General settings.
Lower the resolution and transfer Available only for projectors with a resolution of WUXGA (1920 × 1200). Select to reduce the size of the data to be transferred to the projector by lowering the resolution. Use this option on a slow network or if it takes too long to display the image or projection is interrupted.
Set options - Audio Output When you click the Audio Output tab on the Set options screen, the following screen is displayed. Output audio from the projector Select to output the computer's audio from the projector. Clear to output audio from the computer. However, when playing movies with audio in Movie Sending Mode, audio is always output from the projector regardless of this setting. Note: Audio can only be transferred to one projector. Audio cannot be transferred when connected to multiple projectors.
Toolbar After EasyMP Network Projection starts and a connection is made with the projector, the toolbar is displayed on the computer screen. You can use this toolbar to operate and make settings for the projector, and to disconnect the network connection. Displays the Select target projector screen. Select target projector Click to limit the projectors operated from the toolbar when projecting from multiple projectors using the distribution function or multi-screen display function.
Displays the multi-screen preview screen. Screen Preview Click to display a preview with the settings you have made. Click each display to enlarge each Screen Preview to full-screen. Displays the Set options screen. Set options Click to adjust the transmission performance during the transfer of computer images. Starts Movie Sending Mode. (Supported models only) Movie Sending Mode Disconnects the connection to the projector.
Related topics Set options Projecting Movies Select target projector When you click the button on the toolbar, the following screen is displayed. 1 – Select the projector you want to control. 2 No. Indicates the number assigned to the projector. This number appears under the icon to indicate the number of the projector that you can control from the toolbar. 3 Projector name Displays the projector's name.
5 – Indicates the following status of the projector. Projection has stopped. Currently projecting. Projection has been paused. During the Presentation Mode. During the Movie Sending Mode. Parent topic: Toolbar Related references Search and Connect Screen Related tasks Hiding Computer Operations Projecting Only a PowerPoint Slide Show Related topics Projecting Movies Projector control When you click the button on the toolbar, the following toolbar is displayed.
Hides and mutes the video and audio. A/V Mute Changes to images from the input port to which the computer or USB device are connected. Switch PC source Changes to images from the video input port.
Movie Sending Mode When you click the button on the toolbar and select a projector, the following screen is displayed. 1 Movie file list Displays a list of selected movie files. 2 — Displays the current point in the movie file. You can drag and drop the slider to the point where you want to start playing. 3 Plays the file. 4 Pauses play back. 5 Stops play back.
6 Plays the current file from the beginning. 7 Plays the next file from the beginning. 8 Plays repeatedly from the first file in the list. You cannot repeat one specific file if there are multiple files in the list. Parent topic: Screen Summary Related topics Projecting Movies Add-Remove Virtual Display During installation and startup of EasyMP Network Projection on Windows, the Add-Remove Virtual Display screen is displayed.
1 Virtual Display 1 to 4 Select the virtual display you want to use for the multi-screen display function. You can select up to four monitors.
Appendix See these sections to learn more about EasyMP Network Projection software. Updating and Uninstalling the Software Supported Resolutions and Colors Limitations Notices Updating and Uninstalling the Software Follow these instructions to update or uninstall EasyMP Network Projection.
• Windows Vista and Windows 7: Click Uninstall a program from the Programs category. 5. Select EasyMP Network Projection, and then do one of the following. • Windows XP: Click Change/Remove. • Windows Vista and Windows 7: Click Uninstall/Change. 6. Follow the on-screen instructions. Parent topic: Updating and Uninstalling the Software Uninstalling EasyMP Network Projection (Windows 8) For Windows 8.x, follow the instructions below to uninstall EasyMP Network Projection.
Supported Resolutions and Colors Check these sections for the computer screen resolutions and the number of colors that EasyMP Network Projection can project. Supported Resolutions Display Color Parent topic: Appendix Supported Resolutions The following computer screen resolutions can be projected. You cannot connect to a computer with a resolution greater than WUXGA.
Windows Mac OS X 16-bit color Approx. 32,000 colors (16-bit) 32-bit color Approx. 16.7 million colors (32-bit) The operational guarantee for multi-screen display is 16-bit and 32-bit color. Parent topic: Supported Resolutions and Colors Limitations Check these sections for restrictions applied when projecting computer images while using EasyMP Network Projection.
Because the toolbar is not displayed, you cannot change the Theme (effects) while playing a slide show, regardless of the Windows Experience Index rating. Once simple mode has started, you cannot change modes while Windows Photo Gallery or Windows Live Photo Gallery is running, even if you close EasyMP Network Projection. Restart Windows Photo Gallery or Windows Live Photo Gallery. • You cannot play movies.
Limitations when Projecting from Windows Media Center Note the following limitations when projecting from Windows Media Center. • You cannot project images in full screen mode using Windows Media Center. Switch to window display mode to project the images. • If audio stops during playback when transferring audio from the computer to the projector using EasyMP Network Projection, try restarting the application you are using.
About Notations • Microsoft® Windows® XP Professional operating system • Microsoft® Windows® XP Home Edition operating system • Microsoft® Windows Vista® operating system • Microsoft® Windows® 7 operating system • Microsoft® Windows® 8 operating system • Microsoft® Windows® 8.1 operating system In this guide, the operating systems above are referred to as "Windows XP," "Windows Vista," "Windows 7," "Windows 8", and "Windows 8.1.
Software Copyright: This product uses free software as well as software to which this company holds the rights. © 2015 Epson America, Inc.
