Specifications

S1D12200
Series
Rev. 1.4 EPSON 2–51
S1D12200 Series
1 Case1 (Chip Front)
COM1 • • • COM32
SEG60 • • • • • SEG1
(80)
(COM24, etc.)
Front
S1D12
***
2 Case2 (Chip Rear)
COM1 • • • COM32
SEG1 • • • • • SEG60
(80)
(COM24, etc.)
Rear
S1D12
***
3 Case3 (Chip Front)
COM32 • • • COM1
SEG1 • • • • • SEG60
(80)
(COM24, etc.)
Front
S1D12
***
4 Case4 (Chip Rear)
COM32 • • • COM1
SEG60 • • • • • SEG1
(80)
(COM24, etc.)
Rear
S1D12
***
S1D12400 S1D12205 S1D12200
S1D12200/12205/12400 Example of
System Setup Depending on Mount Direction
Reference
• Unable to correspond with
commands.
• Only able to correspond with
custom fonts. System set • S1 = 0 • S2 = 1 (Horizontally-reversed)
System set • S = 0
System set • S1 = 0 • S2 = 0
System set • CS = 0 • SS = 0
System set • S = 1
System set • S1 = 1 (Vertically-reversed) • S2 = 0
System set • CS = 1 (COM-reversed) • SS = 0
System set • CS = 0 • SS = 1 (SEG-reversed)
However, the input of DDRAM address of "S1D12
***
" from the
first digit of the first line shall be 3FH and 3EH, in this order (as it is reversed in the unit of character).
• Unable to correspond with
commands.
• Only able to correspond with
custom fonts. System set • S1 = 1 (Vertically-reversed) • S2 = 1 (Horizontally-reversed)
System set • CS = 1 (COM-reversed) • SS = 1 (SEG-reversed)
However, the input of DDRAM address of "S1D12
***
" from the
first digit of the first line shall be 3FH and 3EH, in this order.