User Setup Information
47
6. Click
Step 4 Edit Layout
. Your photo is displayed with the frame selection.
Now you can modify the sticker as follows:
■
Use the buttons to reposition the image.
■
Use the and buttons to enlarge or reduce the image.
■
Add text to your photo by clicking Edit Text. Type the text you want and
change the font if desired. Then click
OK. Once the text frame is added,
you can drag it to its final position on the sticker.
7. To save your layout, click
Save
and enter the filename and location where you
want to save it. (To retrieve a layout, click
Step 1 Select Photo
and then
Open
.)
8. Click
Step 5 Print
. Choose the number of copies you want. Film Factory tells
you how many sheets of stickers are required. You can click the
Detailed
Preview
button to see a larger view of the sticker sheet. (See your printer
documentation for instructions on loading sticker media.)
Make sure the PRINT Image Matching box is checked if you want the P. I. M.
settings to be used when the photo is printed (see page 2 for information about
P. I . M . ) .
9.
10.When you are ready, click .
Click
Main Menu
to return to the main screen.
If you want to change or delete text you have added, select the text box,
click the Edit Text button and then change it as desired.
You may want to experiment with sheets of plain paper before using
your photo sticker sheets. To do this, cut several sheets of plain paper to
match the size of your sticker sheets. Print a sheet of plain paper and
then hold it up to a photo sticker sheet to test the alignment. If
necessary, use the positioning tools in the Adjust Print Position box to
match the photo frames to the stickers.