Owners manual
120
Note:
• You must set the remote control ID to match the projector ID each time you turn on the projector
you have set it to control.
• When you select 0 on the remote control, you can operate all projectors regardless of the
Projector ID setting.
• If you turn off the Projector ID setting, the remote control will operate the projector regardless of
the ID selected on the remote.
Parent topic: Using Multiple Projectors
Related references
Projector Setup Settings - Extended Menu
Adjusting Color Uniformity
If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each
projector.
Note:
• The color tone may not be uniform even after performing color uniformity.
• You cannot adjust color uniformity when the Color Mode setting is set to Dynamic.
• Color Uniformity is disabled in the built-in whiteboard mode.
1. Press the Menu button on the remote or control panel, select the Extended menu, and press Enter.