Owner's Manual

90
4 Power switch (turns the transmitter on or off)
5 On/Standby light (flashes when starting up; lit when the transmitter is on)
6 WiHD light (lit when sending a wireless signal to the projector)
7 Link light (lit when connected to the projector; flashing when searching for the projector or when
on standby)
8 TV light (lit when the HDMI Out port is selected as the output)
9 1-4 (HDMI1 through HDMI4) lights (lit when the port is being projected)
Back
1 AC input port (connects the AC adapter)
2 HDMI Out port (connects to display devices such as a television)
3 Optical Audio-Out port (connects to devices with an optical digital audio input port)
4 HDMI1-HDMI3 input ports (connect to your input devices)
5 HDMI4 port (connects to your input device; supports MHL connections)
6 3D glasses charging port (connects a USB cable to charge 3D glasses)
7 Setup button (press for 5 seconds to reset the transmitter settings)
Parent topic: Using WirelessHD