Datasheet

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド
ESC/VP21 Command User
’
s Guide for Home Projectors
Item Terminal Signal name Command
TW5500
PC9500UB
TW420
HC700
TW450
HC705HD
TW3200
TW3600
HC8350
HC8345
PC9350
Cyclic within “SOURCE 1x” SOURCE 10 OK OK OK OK
Analog RGB SOURCE 11 - OK OK -
Digital RGB SOURCE 12 - - - -
RGB Video SOURCE 13 - - - -
YCbCr (*4 Component) SOURCE 14 OK OK(*7) OK(*7) OK
YPbPr (*4 Component) SOURCE 15 OK - - OK
INPUT 1/A
Auto SOURCE 1F OK OK OK OK
Cyclic within “SOURCE 2x” SOURCE 20 OK - - OK
Analog RGB SOURCE 21 OK - - OK
RGB Video SOURCE 22 - - - -
YCbCr (*5 Component) SOURCE 23 - - - -
YPbPr (*5 Component) SOURCE 24 - - - -
YPbPr SOURCE 25 - - - -
INPUT 2/B
Auto SOURCE 2F - - - -
Cyclic within “SOURCE 3x” SOURCE 30 OK OK OK OK
INPUT 3
Digital RGB SOURCE 31 - - - -
Cyclic within “SOURCE Cx” SOURCE C0 - - - -
YCbCr SOURCE C4 - - - -
YPbPr SOURCE C5 - - - -
INPUT 5
Auto SOURCE CF - - - -
HDMI2 HDMI SOURCE A0 OK - - OK
VIDEO Cyclic within “SOURCE 4x” SOURCE 40 OK - OK OK
VIDEO (RCA) <= SOURCE 41 OK OK OK OK
VIDEO (S) <= SOURCE 42 OK OK OK OK
VIDEO (YCbCr) <= SOURCE 43 - - - -
Source
change
VIDEO (YPbPr) <= SOURCE 44 - - - -
(*3)Only when TW10 is connected, the source is not cycled within a signal that can select on a terminal by these commands.
(*4)This signal is selected when TW10 and TW20 is connected.
(*5)This signal is selected when TW500 is connected.
(*6)This signal is selected when TW600/520/550/800/700/1000 is connected.
(*7)This command is can be used only for get.