Datasheet

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド
ESC/VP21 Command User
’
s Guide for Home Projectors
3. Applicable models
ELP-TW100/TW100H/TS10, EMP-TW10/TW200/TW500/TW10H/TW200H/TW20/TW600/TW520/TW550/
TW800/TW700/TW1000/TW2000, EH-TW2800/TW2900/TW3000/TW3200/TW3500/TW3600/TW3800/
TW4000/TW4400/TW4500/ TW5000/TW5500 TW5800/,
EH-TW420/TW450, PL-HomeCinema400/700/720/1080/1080UB/705HD/6100/6500UB/8100/8345/8350/8500UB,
PL-ProCinema800/810/1080/1080UB/7100/7500UB/9100/9350/9500UB
4. Command Table
Command Command Models All Models
ON PWR ON Available (*1)PWR ON
OFF PWR OFF Available
ON MUTE ON AvailablePWR OFF (note4)
OFF MUTE OFF Available
Black MSEL 00 Available
Blue MSEL 01 Available
SOURCE (note3)
User Logo MSEL 02 Available (*2)
(*1)The "PWR ON" command for TW200 and TW200H needs to prepare for use. First step is to turn on the projector.
And then send the
"SPWRLVL 01" command to the projector after the status of projector goes into the condition that the projector can
receive ESC/VP21 command.
Second steps is to turn off the projector once. The "PWR ON" can work on TW200 and TW200H after the status of
projector becomes the standby state.
•TW500 needs to change the setting item to use "PWR ON" command. To validate the "PWR ON" command of
TW500, "Network Monitoring" of "Operation" in "Setting" menu must be set to ON. The "PWR ON" command can
work on TW500 after the projector is turned off once and the status of projector becomes the standby state.
(*2)TW10/TW10H does not support the User Logo function.
Item Terminal Signal name Command
TW100/
100H
TS10
TW10/
10H
TW200/
200H
TW500
Cyclic within “SOURCE 1x” SOURCE 10 OK OK OK(*3) OK OK
Analog RGB SOURCE 11 OK OK - - OK
Digital RGB SOURCE 12 - OK - - -
RGB Video SOURCE 13 - OK OK OK OK
YCbCr (*4 Component) SOURCE 14 - - OK OK OK
YPbPr (*4 Component) SOURCE 15 - - OK OK OK
INPUT 1/A
Auto SOURCE 1F - - - - OK
Cyclic within “SOURCE 2x” SOURCE 20 OK OK OK(*3) OK OK
Analog RGB SOURCE 21 OK OK OK OK OK
RGB Video SOURCE 22 - OK - - -
YCbCr (*5 Component) SOURCE 23 OK OK - - OK
YPbPr (*5 Component) SOURCE 24 OK OK - - OK
YPbPr SOURCE 25 - - - - OK
INPUT 2/B
Auto SOURCE 2F - - - - OK
Cyclic within “SOURCE 3x” SOURCE 30 - - - - OK
INPUT 3
Digital RGB SOURCE 31 OK - - - -
Cyclic within “SOURCE Cx” SOURCE C0 - - - OK OK
YCbCr SOURCE C4 - - - OK OK
YPbPr SOURCE C5 - - - OK OK
INPUT 5
Auto SOURCE CF - - - - OK
VIDEO Cyclic within “SOURCE 4x” SOURCE 40 OK OK OK OK OK
VIDEO (RCA) <= SOURCE 41 OK OK OK OK OK
VIDEO (S) <= SOURCE 42 OK OK OK OK OK
VIDEO (YCbCr) <= SOURCE 43 OK - - - -
Source change
VIDEO (YPbPr) <= SOURCE 44 OK - - - -