ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors ESC/VP21 Command User’s Guide for Home Projectors
ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors Table of Contents 1. Introduction to ESC/VP21.................................................................................................................................. 3 2. ESC/VP21 Command Formats........................................................................................................................... 4 3. Applicable models ........................................................................
ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors 1. Introduction to ESC/VP21 ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and monitor Epson projectors. The command codes are comprised of ASCII codes. Therefore the command codes can be understood very easily and you can easily control projectors using a PC with a terminal emulator such as Microsoft Hyper terminal.
ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors 2. ESC/VP21 Command Formats 2.1. Set command format A set command consists of a command and a parameter. Projector returns a colon after executing the command. There are two types of parameters. One is fixed such as ON, OFF, or 21. Other is a step parameter such as INC, DEC or INIT. INC: increments the parameter by one. DEC: decrements the parameter by one. INIT: initializes the parameter. 2.2.
ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors 3. Applicable models ELP-TW100/TW100H/TS10, EMP-TW10/TW200/TW500/TW10H/TW200H/TW20/TW600/TW520/TW550/ TW800/TW700/TW1000/TW2000, EH-TW2800/TW2900/TW3000/TW3200/TW3500/TW3600/TW3800/ TW4000/TW4400/TW4500/ TW5000/TW5500 TW5800/, EH-TW420/TW450, PL-HomeCinema400/700/720/1080/1080UB/705HD/6100/6500UB/8100/8345/8350/8500UB, PL-ProCinema800/810/1080/1080UB/7100/7500UB/9100/9350/9500UB 4.
ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors Item Terminal INPUT 1/A INPUT 2/B Source change INPUT 3 INPUT 5 Signal name Command Cyclic within “SOURCE 1x” SOURCE 10 Analog RGB SOURCE 11 Digital RGB SOURCE 12 RGB Video SOURCE 13 YCbCr (*4 Component) SOURCE 14 YPbPr (*4 Component) SOURCE 15 Auto SOURCE 1F Cyclic within “SOURCE 2x” SOURCE 20 Analog RGB SOURCE 21 RGB Video SOURCE 22 YCbCr (*5 Component) SOURCE 23 YPbPr (*5 Component) SOURCE 24
ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors TW3200 Item Terminal Signal name Command TW5500 PC9500UB TW420 HC700 HC705HD OK OK OK OK OK OK OK OK OK OK OK - OK OK OK(*7) OK OK OK OK - OK OK OK(*7) OK OK OK OK OK - TW450 TW3600 HC8350 HC8345 PC9350 INPUT 1/A INPUT 2/B Cyclic within “SOURCE 1x” SOURCE 10 Analog RGB SOURCE 11 Digital RGB SOURCE 12 RGB Video SOURCE 13 YCbCr (*4 Component) SOURCE 14 YPbPr (*4 Component) SOURCE 15 Auto SOURCE 1F Cy
ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors 5. Appendix 5.1. Communication specification A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the projector.
ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド ESC/VP21 Command User’s Guide for Home Projectors 6. Revision History Revision Issued date Page Description A Oct 19,2005 All pages First Release B Sep 29,2006 All pages Addition of TW700 C Mar 19,2007 All pages Addition of TW1000 D Jun 4,2007 All pages Correction of “Applicable Model”.
