User`s guide

Using the Projector on a Network 81
Enabling WPA Security
1. Press Menu. Highlight Network and then press Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security, then press Enter. You see the following
screen:
4. Press
Enter to show the menu, then choose PSK and press Enter.
5. Highlight the
PSK (pre-shared key) text box and press Enter. Use
the buttons to select individual letters; then press
Enter to
input a character. To add a blank space or to navigate backward
and forward through the input text, highlight the arrows and
press
Enter. To toggle symbol settings or capital letters, highlight
the option and press
Enter. When you’re done, highlight Finish
and press
Enter.
6. When you’re done making these settings, highlight the
Return
button at the top of the screen, then press
Enter. Choose
Complete
and press Enter, then choose Yes and press Enter to
save your settings.
note
If the password is longer
than 32 characters, enter it
by accessing the projector
from a web browser. This
lets you enter up to 63
characters. See the EasyMP
Operation Guide for details.