User`s guide

80 Using the Projector on a Network
symbol settings or capital letters, highlight the option and press
Enter. When you’re done, highlight Finish and press Enter.
7. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
■ For 128 bit WEP encryption with hexadecimal input, enter
26 characters, from 0 to 9 and from A to F.
■ For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■ For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
■ For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
8. When you’re done making these settings, highlight the
Return
button at the top of the screen, then press
Enter. Choose
Complete
and press Enter, then choose Yes and press Enter to
save your settings.