User`s guide

Using the Projector on a Network 79
Enabling WEP Encryption
1. Press Menu on the projector remote. Highlight Network and
then press
Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security, then press Enter. You see the following
screen:
4. For the WEP encryption setting, select
128Bit or 64Bit and press
Enter.
5. For Format, highlight
ASCII to enable text input or HEX to
enable hexadecimal input, then press
Enter.
6. If you chose
64Bit, choose Encryption key 1, 2, 3, or 4.
Highlight the
Encryption key text box that corresponds to the
Key ID you selected, then press
Enter. Use the buttons to
select individual letters; then press
Enter to input a character. To
add a blank space or to navigate backward and forward through
the input text, highlight the arrows and press
Enter. To toggle
note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try ASCII
first. If that doesn’t work,
try Text2 and then Text3.