Specifications

3-4 Command Reference Rev. A
Status commands
(continued)
GS ENQ
Transmit real-time printer status Hardware extension
O
GS a
Enable/disable Automatic
Status Back (ASB)
Hardware extension
O
GS r
Transmit status Hardware extension
O
Bit-image commands
ESC
✻
Select bit-image mode Basic single
O
GS
✻
Define user-defined bit image Software extension
O
GS /
Print user-defined bit image Software extension
O
Bar code commands
GS H
Select printing position for HRI
characters
Software extension
GS f
Select font for HRI characters Software extension
GS h
Select bar code height Software extension
GS k
Print bar code Software extension
GS w
Select bar code width Software extension
Macro function
commands
GS :
Start/end macro definition Software extension
GS ^
Execute macro Software extension
Kanji control
commands
FS !
Select print mode(s) for Kanji
characters
Software extension
FS &
Select Kanji character mode Software extension
FS –
Turn underline mode on/off for
Kanji characters
Software extension
FS .
Cancel Kanji character mode Software extension
FS 2
Define user-defined Kanji
characters
Software extension
FS C
Select Kanji character code
system
Software extension
FS S
Set Kanji character spacing Software extension
FS W
Turn quadruple-size mode on/
off for Kanji characters
Software extension
Mechanism control
commands
ESC <
Return home Mechanical extension
O
ESC F
Set/cancel slip paper reverse
eject
Mechanical extension
ESC U
Turn unidirectional printing mode
on/off
Mechanical extension
O
ESC i
Partial cut (one point left uncut) Mechanical extension
O
ESC m
Partial cut (three points left
uncut)
Mechanical extension
O
ESC o
Stamp Mechanical extension
O
Function Type Command Name Matrix Category
Supported
Command
The TM-U950/U950P supports the commands marked with a O in the “Supported Command” column.
The TM-U950/U950P with the MICR option supports the commands marked with a
●
in the “Supported Command” column.