Specifications

Rev. A Command Reference 3-3
TM–U950/U950P Information Manual
Character commands
(continued)
ESC z
Turn parallel printing mode on/
off for receipt and journal paper
Mechanical extension
O
ESC {
Turn upside-down printing mode
on/off
Basic single
O
GS !
Select character size Software extension
GS B
Turn white/black reverse printing
mode on/off
Software extension
GS b
Turn smoothing mode on/off Software extension
Printing paper
commands
ESC c 0
Select paper type(s) for printing Basic multiple
O
ESC c 1
Select paper type(s) for
command settings
Mechanical extension
O
ESC f
Set slip paper wait time Mechanical extension
O
Paper sensor
commands
ESC c 3
Select paper sensor(s) to output
paper-end signals
Mechanical extension
O
ESC c 4
Select paper sensor(s) to stop
printing
Mechanical extension
O
Print position
commands
HT
Horizontal tab Software extension
RS
Journal tab Mechanical extension
O
ESC $
Set absolute print position Software extension
O
ESC D
Set horizontal tab positions Software extension
ESC T
Select print direction in page
mode
Software extension
ESC W
Set printing area in page mode Software extension
ESC \
Set relative print position Software extension
O
ESC a
Select justification Software extension
O
GS $
Set absolute vertical print
position in page mode
Software extension
GS L
Set left margin Software extension
GS W
Set printing area width Software extension
GS \
Set relative vertical print position
in page mode
Software extension
Status commands
DLE EOT
Transmit real-time status Hardware extension
O
DLE EOT BS
Transmit real-time MICR status Hardware extension
●
ESC u
Transmit peripheral device status Hardware extension
O
ESC v
Transmit paper sensor status Hardware extension
O
Function Type Command Name Matrix Category
Supported
Command
The TM-U950/U950P supports the commands marked with a O in the “Supported Command” column.
The TM-U950/U950P with the MICR option supports the commands marked with a
●
in the “Supported Command” column.