Specifications

Rev. A Command Descriptions 1-37
TM–U950/U950P Information Manual
DLE EOT BS n
[Name] Transmit real-time MICR status
[Format] ASCII DLE EOT BS n
Hex 100408n
Decimal 16 4 8 n
[Range] n = 1
DLE EOT BS n transmits the selected MICR status specified by n in real time as follows:
The status information to be transmitted is shown in the table below.
2
Off 00 0 Cover closed.
On 04 4 Cover open.
3
Off 00 0 On-line.
On 08 8 Off-line.
4
Off 00 0 Drawer kick-out connector pin 3 is LOW.
On 10 16 Drawer kick-out connector pin 3 is HIGH.
5
Off 00 0 Slip insertion sensor: paper present.
On 20 32 Slip insertion sensor: paper not present.
6
Off 00 0 No error.
On 40 64 Error.
7 Off 00 0 Not used. Fixed to Off.
Program Example
PRINT #1, CHR$(&H1D);CHR$(&H5);
n Function
1 Transmit MICR status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2
Off 00 0 MICR function selected.
On 04 4 MICR function not selected.
3
Off 00 0
Check paper or cleaning sheet insertion: not
waiting.
On 08 8
Check paper or cleaning sheet insertion:
waiting.
Bit Off/On Hex Decimal Status