Specifications

1-20 Command Descriptions Rev. A
The paper sensor(s) used to output paper-end signals are selected by using n as follows:
Printing Paper Commands
The TM-U950/U950P supports the following commands for controlling printing paper.
Command Name
ESC c 0 Select paper type(s) for printing
ESC c 1 Select paper type(s) for command settings
ESC f Set slip paper wait time
ESC c 0 n
[Name] Select paper type(s) for printing
[Format] ASCII ESC c 0 n
Hex 1B 63 30 n
Decimal279948n
[Range] 1 ≤
n
≤ 4
Bit Off/On Hex Decimal Function
0
Off 00 0 Journal near-end sensor disabled.
On 01 1 Journal near-end sensor enabled.
1
Off 00 0 Receipt near-end sensor disabled.
On 02 2 Receipt near-end sensor enabled.
2
Off 00 0 Journal end sensor disabled.
On 02 4 Journal end sensor enabled.
3
Off 00 0 Receipt end sensor disabled.
On 08 8 Receipt end sensor enabled.
4
Off 00 0 Slip insertion sensor disabled.
On 10 16 Slip insertion sensor enabled.
5
Off 00 0 Slip ejection sensor disabled.
On 20 32 Slip ejection sensor enabled.
6, 7 — 00 0 Undefined.
Program Example
PRINT #1, CHR$(&H1B);"c3";CHR$(63);
←
All sensors enabled