Specifications

Confidential

SHEET

NO.

SHEET

REVISION

TITLE

TM-U590 series

Specification

(STANDARD)

CAN

[Name] Cancel print data in page mode

[Format] ASCII CAN

Hex 18

Decimal 24

[Description] In page mode, deletes all the print data in the current printable area.

[Notes] • This command is enabled only in page mode.

• If data that existed in the previously specified printing area also exists in the

currently specified printing area, it is deleted.

[Reference] ESC L, ESC W

DLE EOT n

[Name] Real-time status transmission

[Format] ASCII DLE EOT n

Hex 10 04 n

Decimal 16 4 n

[Range] 1 ≤ n ≤ 3, n = 5

[Description] Transmits the selected printer status specified by n in real time, according to the

following parameters:

n = 1: Transmit printer status

n = 2: Transmit offline status

n = 3: Transmit error status

n = 5: Transmit slip paper status

[Notes] • The printer transmits the status without confirming whether the host computer

can receive data.

• The printer executes this command upon receiving it.

• This command is executed even when the printer is offline, the receive buffer is

full, or there is an error status with a serial interface model.

• With a parallel interface model, this command can not be executed when the

printer is busy. This command is executed even when the printer is offline or

there is an error status when DIP switch 2-1 is on with a parallel interface model.

• The status is transmitted whenever the data sequence of <10>H<04>Hn

(1 ≤ n ≤ 5) is received.

Example:

In ESC ∗ m n

d1 ... dk, d1=<10>H, d2=<04>H, d3=<01>H