Specifications

Confidential
SHEET
75
NO.
SHEET
REVISION
H
TITLE
NEXT
76
TM-U590 series
Specification
(STANDARD)
FF
[Name] ① Print and eject slip paper
② Print and return to standard mode in page mode
[Format] ASCII FF
Hex 0C
Decimal 12
For ①
[Description] Prints the data in print buffer and ejects the slip paper.
[Notes] • When the slip ejection length has been set by ESC C, the specified length is
ejected, regardless of the TOF and BOF sensors.
• The slip is ejected in the direction specified by ESC F.
• This command sets the print position to the beginning of the line.
[Reference] ESC C, ESC F
For ②
[Description] Prints the data in the print buffer collectively and returns to standard mode.
[Notes] • This command is enabled only in page mode.
• The buffer data is deleted after being printed.
• The printing area set by ESC W is reset to the default setting.
• This command sets the print position to the beginning of the line.
[Reference] ESC FF, ESC L, ESC S
CR
[Name] Print and carriage return
[Format] ASCII CR
Hex 0D
Decimal 13
[Description]
Automatic line feed enabled Automatic line feed disabled
Functions as same as LF
Prints the data in the print buffer and does not feed
the paper.
[Notes] • This command sets the print starting position to the beginning of the line.
• With a serial interface model, this command executes the same operation as
when disabling the automatic line feed.
• With a parallel interface model.This command is set according to the DIP switch
1-1 setting.
[Reference] LF