Specifications

Confidential
SHEET
73
NO.
SHEET
REVISION
H
TITLE
NEXT
74
TM-U590 series
Specification
(STANDARD)
(4) Start of line
The start of line state satisfies the following condition:
• There is no print data (including spaces and portions of data skipped due to HT) currently
in the print buffer.
• The print position is not specified by the ESC $ or ESC \ command.
(5) Printable area
The maximum range within which printing is possible under the printer specifications. The
printable area for this printer is as follows:
① The length in the horizontal direction in standard mode:
Approximately 135.467 mm {800/150"}
➁ The length in the horizontal dimension in page mode: Approximately 135.467 mm {800/150"}
➂ The length in the vertical dimension in page mode: Approximately 318.206 mm {1804/144"}
(6) Printing area
Printing range is set by the command. It must be printing area ≤ printable area.
(7) Ignore
The state in which all codes, including parameters, are read in and discarded, and nothing
happens.
(8) Inch
A unit of length. One inch is 25.4 mm.
(9) MSB
Most Significant Bit
(10) LSB
Least Significant Bit
(11) Base line
Standard position when character data is stored in the print buffer.
Base line
9 dots
A