Specifications

Confidential
SHEET
34
NO.
SHEET
REVISION
H
TITLE
NEXT
35
TM-U590 series
Specification
(STANDARD)
Command Classification
Command Name
Executing Setting
GS !
Select character size
{
GS $
Set absolute vertical print position in page mode
∗
GS ∗
Define user-defined bit image
{
GS ( A
Execute test print
{
GS /
Print user-defined bit image
{
GS I
II
I
Transmit printer ID
{
GS L
Set left margin
{
GS P
Set horizontal and vertical motion units
{
GS W
Set printing area width
{
GS \
Set relative vertical print position in page mode
∗
GS a
Enable/disable Automatic Status Back (ASB)
{ {
GS r
Transmit status
{
Kanji command list (when the Japanese, Simplified Chinese, or Traditional Chinese model is
used)
Command Classification
Command Name
Executing Setting
FS !
Set print mode(s) for Kanji characters
{
FS &
Select Kanji character mode
{
FS -
Turn underline mode on/off for Kanji characters
{
FS .
Cancel Kanji character mode
{
FS 2
Define user-defined Kanji characters
{
FS C
Select Kanji character code system
{
FS S
Set left- and right-side Kanji character spacing
{
FS W
Turn quadruple-size mode on/off for Kanji characters
{
<Fundamental calculation pitch>
The fundamental calculation pitch is used to set the minimum pitch by software instead of by
mechanical pitch. Using the fundamental calculation pitch minimizes dependence on the
mechanical pitch for setting, e.g., the paper feed amount, and enables the printing position to be
set in inches. (Refer to GS P.)