Specifications

Confidential
SHEET
140
NO.
SHEET
REVISION
H
TITLE
NEXT
141
TM-U590 series
Specification
(STANDARD)
FS S n1 n2
[Name] Set left- and right-side Kanji character spacing
[Format] ASCII FS S n1 n2
Hex 1C 53 n1 n2
Decimal 28 83 n1 n2
[Range] 0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 255
[Description] Sets left- and right-side Kanji character spacing n1 and n2, respectively.
• When the printer model used supports GS P, the left-side character spacing is
[n1 × horizontal or vertical motion units] inches, and the right-side character
spacing is [n2 × horizontal or vertical motion units] inches.
[Notes] • When double-width mode is set, the left- and right-side character spacing is
twice the normal value.
• The horizontal and vertical motion units are set by GS P. The previously
specified character spacing does not change, even if the horizontal or vertical
motion unit is changed using GS P.
• The value cannot be less than the minimum horizontal movement amount, and
must be in even units of the minimum horizontal movement amount.
[Default] n1 = 0, n2 = 0
[Reference] GS P