Specifications

Confidential
SHEET
114
NO.
SHEET
REVISION
H
TITLE
NEXT
115
TM-U590 series
Specification
(STANDARD)
ESC f t1 t2
[Name] Set slip paper waiting time
[Format] ASCII ESC f t1 t2
Hex 1B 66 t1 t2
Decimal 27 102 t1 t2
[Range] t1 = 0
0 ≤ t2 ≤ 64
[Description] Sets the time that the printer waits for slip paper to be inserted and the time from
insertion of the slip to the start of printing.
• t1 specifies the wait time for slip paper to be inserted.
• t2 specifies time from insertion of the slip to the start of printing.
[Notes] • The printer starts operation [t2 × 0.1] seconds after detecting a slip.
• When either t1 or t2 is out of the specified range, this command is ignored and
the previously set value is not changed.
• When t1 is out of the specified range, this command is ignored and the following
data is executed normally.
• When the cut sheet insert waiting time is set longer than the default setting, there
are a few possibility that the paper jams because the user may insert the paper
too much. Therefore, the default setting is recommended to avoid this problem.
[Default] t1 = 0, t2 = 5