Specifications

Confidential
SHEET
111
NO.
SHEET
REVISION
H
TITLE
NEXT
112
TM-U590 series
Specification
(STANDARD)
ESC c 4 n
[Name] Select paper sensor(s) to stop printing
[Format] ASCII ESC c 4 n
Hex 1B 63 34 n
Decimal 27 99 52 n
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is detected,
using n as follows:
Bit Off/On Hex Decimal Function
0 - - - Undefined
1 - - - Undefined
2 - - - Undefined
3 - - - Undefined
4 Off 00 0 TOF sensor disabled.
On 10 16 TOF sensor enabled.
5 Off 00 0 BOF sensor disabled.
On 20 32 BOF sensor enabled.
6 - - - Undefined.
7 - - - Undefined.
[Notes] • It is possible to select multiple sensors for print control to stop printing. Then if
any sensor detects a paper end, the printer stops printing.
• When a paper end is detected, printing is stopped after printing the current line
and feeding the paper.
• When the TOF sensor or the BOF sensor is enabled and a paper-end is
detected, the printer ejects the paper after printing as much as possible and
enters the paper waiting state.
• When a paper-end is detected by the BOF sensor, the printer does not go off-line
after printing stops.
[Default] n = 0