Specifications

Confidential
SHEET
110
NO.
SHEET
REVISION
H
TITLE
NEXT
111
TM-U590 series
Specification
(STANDARD)
ESC c 3 n
[Name] Select paper sensor(s) to output paper end signals
[Format] ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) to output paper end signals
• Each bit of n is used as follows:
Bit Off/On Hex Decimal Function
0 - - - Undefined
1 - - - Undefined
2 - - - Undefined
3 - - - Undefined
4 Off 00 0 TOF sensor disabled
On 10 16 TOF sensor enabled
5 Off 00 0 BOF sensor disabled
On 20 32 BOF sensor enabled
6, 7 - - - Undefined
[Notes] • It is possible to select multiple sensors to output signals. Then, if any of the
sensors detects a paper end, the paper end signal is output.
• Sensor is switched when executing this command. The paper end signal
switching be delayed depending on the receive buffer state.
• When all the sensors are disabled, the paper end signal always outputs a paper
present status.
• The command is available only with a parallel interface and is ignored with a
serial interface.
[Default] n = 0