Specifications

3-11
TM–U375/U375P Information Manual
ESC c 3 Select paper
sensor(s) to
output paper-
end signals
Selects paper
sensor(s) to output
paper-end signals.
O O O O O O OOOO O O O O
ESC c 4 Select paper
sensor(s) to
stop printing
Selects the paper
sensor that stops
printing when the
paper runs out.
●●●●●●●●●●●●● ● ● ● ● ●
ESC c 5 Enable/disable
panel buttons
Enables or disables
the panel buttons.
●●●●●●●●●●●●● ● ●●●●●
ESC c 6 Enable/disable
on-line button
Enables or disables
the on-line button.
●
●
ESC d Print and
feed n lines
Prints the data in the
print buffer and
feeds n lines.
●●●●●●●●●●●●● ● ●●●●●
ESC e Print and
reverse feed
n lines
Prints the data in the
print buffer and
feeds n lines in the
reverse direction.
●● ●●●
ESC f Set cut sheet
wait time
Sets the time that the
printer waits for cut
sheet to be inserted
and the time from
insertion of the sheet
until printing starts.
●●●●●● ●
ESC i Partial cut
(one point
left uncut)
Executes a partial
cut of the paper with
one point left uncut.
● ●●● ●● ● ●
ESC m Partial cut
(three points
left uncut)
Executes a partial
cut of the paper with
three points left
uncut.
●●● ●● ●●
Command Name Function
Supported Command
TM-
267II
TM-T Series TM-L Series TM-U200 TM-300/300M
TM-
270
TM-U375
TM-U375M
TM-
U925
TM-U950
TM-U950M
TM-
215S
TM-
295
T60 T80 T80M T85 L60 L60II B D A B C D
The commands supported by each printer are marked by a
● or a O. The functions of the commands marked by a O may differ, depending on the printer model.