Specifications

3-9
TM–U375/U375P Information Manual
ESC @ Initialize
printer
Clears the data in the
print buffer and resets
the printer mode to
the mode that was in
effect when the
power was turned on.
●●●●●●●●●●●●● ● ●●●●●
ESC C Set cut sheet
eject length
Sets the eject length
for cut sheet to a
specified number of
lines.
●●●● ●
ESC D Set horizontal
tab positions
Sets the horizontal
tab positions.
●●●●●●●●●●●●● ● ● ● ●
ESC E Turn
emphasized
mode on/off
Turns emphasized
mode on or off. ●●●●●●OOOO ●●●
ESC F Set/cancel
cut sheet
reverse eject
Sets or cancels the
cut sheet reverse
eject.
●
ESC G Turn double-
strike mode
on/off
Turns double-strike
mode on or off. ●●●●●●OOOO ●●●
ESC J Print and
feed paper
Prints the data in the
print buffer and
feeds the paper a
specified distance.
●●●●●●●●●●●●● ● ●●●●●
ESC K Print and
reverse feed
Prints the data in the
print buffer and
feeds the paper a
specified distance in
the reverse direction.
●● ●●●
ESC L Select page
mode
Switches from
standard mode to
page mode.
●●
●●
Command Name Function
Supported Command
TM-
267II
TM-T Series TM-L Series TM-U200 TM-300/300M
TM-
270
TM-U375
TM-U375M
TM-
U925
TM-U950
TM-U950M
TM-
215S
TM-
295
T60 T80 T80M T85 L60 L60II B D A B C D
The commands supported by each printer are marked by a
● or a O. The functions of the commands marked by a O may differ, depending on the printer model.