Specifications

Rev. A Command Reference 3-5
TM–U375/U375P Information Manual
MICR commands FS a 0 Read check paper Mechanical extension
FS a 1 Load check paper to print
starting position
Mechanical extension
FS a 2 Eject check paper Mechanical extension
FS b Request retransmission of check
paper reading result
Mechanical extension
FS c MICR mechanism cleaning Mechanical extension
Miscellaneous function
commands
DLE ENQ Real-time request to printer Software extension
O
ESC = Select peripheral device Software extension O
ESC @ Initialize printer Basic single O
ESC L Select page mode Software extension O
ESC S Select standard mode Software extension
ESC p Generate pulse Hardware extension
O
FS L Select double-density page
mode
Software extension
GS < Initialize printer mechanism Mechanical extension
GS A Adjust label print starting position Hardware extension
GS C 0 Select counter print mode Software extension
GS C 1 Select count mode (A) Software extension
GS C 2 Set counter Software extension
GS C ; Select count mode (B) Software extension
GS E Select head control method Hardware extension
O
GS I Transmit printer ID Hardware extension
O
GS P Set horizontal and vertical
motion units
Software extension
O
GS c Print counter Software extension
GS z 0 Set on-line recovery wait time Mechanical extension
Function Type Command Name Matrix Category
Supported
Command
The TM-U375/U375P supports the commands marked with a O in the “ Supported Command” column.
The TM-U375P supports the commands marked with a
● in the “ Supported Command” column.