Specifications

Rev. A Command Reference 3-3
TM–U375/U375P Information Manual
Character commands
(continued)
ESC z Turn parallel printing mode on/
off for receipt and journal
Mechanical extension
ESC { Turn upside-down printing mode
on/off
Basic single
O
GS ! Select character size Software extension
GS B Turn white/black reverse printing
mode on/off
Software extension
GS b Turn smoothing mode on/off Software extension
Panel button
commands
ESC c 5 Enable/disable panel buttons Hardware extension
O
ESC c 6 Enable/disable on-line button Hardware extension
Printing paper
commands
ESC c 0 Select paper type(s) for printing Basic multiple
O
ESC c 1 Select paper type(s) for
command settings
Mechanical extension O
ESC f Set cut sheet wait time Mechanical extension O
Paper sensor
commands
ESC c 3 Select paper sensor(s) to output
paper-end signals
Mechanical extension
●
ESC c 4 Select paper sensor(s) to stop
printing
Mechanical extension O
Print position
commands
HT Horizontal tab Software extension O
RS Journal tab Mechanical extension
ESC $ Set absolute print position Software extension
O
ESC D Set horizontal tab positions Software extension O
ESC T Select print direction in page
mode
Software extension O
ESC W Set printing area in page mode Software extension O
ESC \ Set relative print position Software extension O
ESC a Select justification Software extension O
GS $ Set absolute vertical print
position in page mode
Software extension
GS L Set left margin Software extension
O
GS W Set printing area width Software extension O
GS \ Set relative vertical print position
in page mode
Software extension
Bit-image commands ESC
✻ Select bit-image mode Basic single
O
GS ✻ Define downloaded bit image Software extension
O
GS / Print downloaded bit image Software extension
O
Function Type Command Name Matrix Category
Supported
Command
The TM-U375/U375P supports the commands marked with a O in the “ Supported Command” column.
The TM-U375P supports the commands marked with a ● in the “ Supported Command” column.