Specifications

3-2 Command Reference Rev. A
Function Classification
Function Type Command Name Matrix Category
Supported
Command
Print commands LF Print and line feed Basic single
O
FF 1. Print and eject cut sheet (in
standard mode)
Mechanical extension
O
2. Print and return to standard
mode (in page mode)
Mechanical extension
O
3. Print and feed label to print
starting position (on label)
Mechanical extension
CR Print and carriage return Mechanical extension
O
ESC FF Print data in page mode Software extension
ESC J Print and feed paper Mechanical extension
O
ESC K Print and reverse feed Mechanical extension
ESC d Print and feed
n lines Basic single
O
ESC e Print and reverse feed n lines Mechanical extension
GS FF Print and eject label Hardware extension
Line spacing
commands
ESC 2 Select default line spacing Mechanical extension
O
ESC 3 Set line spacing Mechanical extension
O
ESC C Set cut sheet eject length Mechanical extension
O
Character commands CAN Cancel print data in page mode Software extension O
ESC SP Set right-side character spacing Basic single O
ESC ! Select print mode(s) Basic single O
ESC % Select/cancel user-defined
character set
Software extension O
ESC & Define user-defined characters Software extension O
ESC – Turn underline mode on/off Software extension O
ESC ? Cancel user-defined characters Software extension O
ESC E Turn emphasized mode on/off Software extension O
ESC G Turn double-strike mode on/off Software extension O
ESC R Select an international
character set
Basic single O
ESC V Turn 90 ° clockwise rotation mode
on/off
Software extension O
ESC r Select print color Mechanical extension
ESC t Select character code table Basic single
O
The TM-U375/U375P supports the commands marked with a O in the “ Supported Command” column.
The TM-U375P supports the commands marked with a ● in the “ Supported Command” column.