Specifications

Rev. A iii
Specifications
❏ Printing specifications
Printing method: 9-pin, serial impact dot matrix
Printing speed: Approximately 3.5 LPS
(40 columns, 16 CPI, continuous printing)
Approximately 5.4 LPS
(20 columns, 16 CPI, continuous printing)
Number of printable columns: 40/33
❏ Character specifications
Character fonts: 7 × 9/5 × 9
Character pitch: 16/13.3 CPI
Character size: 1.24(W) × 3.1(H) mm/1.56(W) × 3.1(H) mm
Character sets: ASCII: 95 characters
International: 32 characters
Extended graphics: 128 characters × 6 pages
❏ Paper specifications
Paper size: Paper roll: 75.5-76.5(W) mm × 83.0 mm diameter
Slip paper: 70(W) × 160(L) mm – 182(W) × 257(L) mm
Validation paper: 135(W) × 70(L) mm – 182(W) × 257(L) mm
Thickness: Paper roll: 0.06 mm – 0.085 mm
Slip paper: 0.09 mm – 0.31 mm
❏ Interface: RS-232 (serial interface)
or
IEEE-1284 (parallel interface)
❏ Data buffer: 4K or 40 bytes (selectable by DIP switch)