Specifications

1-38 Command Descriptions Rev. A
Error status (n=3)
Paper roll sensor status (n=4)
Slip paper status (n=5)
Bit Off/On Hex Decimal Status
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2
Off 00 0 No mechanical error.
On 04 4 Mechanical error occurred.
3 — — — Undefined.
4 On 10 16 Not used. Fixed to On.
5
Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurred.
6
Off 00 0 No automatically recoverable error.
On 40 64 Automatically recoverable error occurred.
7 Off 00 0 Not used. Fixed to Off.
Bit Off/On Hex Decimal Status
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2, 3
Off 00 0 Paper roll near-end sensor: paper adequate.
On 0C 12 Paper roll near-end sensor: paper near end.
4 On 10 16 Not used. Fixed to On.
5, 6 — — — Undefined.
7 Off 00 0 Not used. Fixed to Off.
Bit Off/On Hex Decimal Status
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2
Off 00 0 Slip paper selected.
On 04 4 Slip paper not selected.
3
Off 00 0 Does not wait for slip paper insertion.
On 08 8 Waits for slip paper insertion.
4 On 10 16 Not used. Fixed to On.
5, 6
Off 00 0 Cut-sheet sensor: slip or validation paper present.
On 60 96 Cut-sheet sensor: slip or validation paper not persent.
7 Off 00 0 Not used. Fixed to Off.