Specifications

1-36 Command Descriptions Rev. A
Drawer kick-out connector status (n=2, 50)
Cut-sheet (slip or validation paper) status (n=3, 51)
Transmits the values 00H - 0FH, indicating the remaining printable area as follows:
DLE EOT n
[Name] Real-time status transmission
[Format] ASCII DLE EOT n
Hex 10 04 n
Decimal 16 4 n
[Range] 1 ≤ n ≤ 6
DLE EOT n transmits the specified status in real time. This command is executed even when the
printer is off-line, the print buffer is full, or an error occurs. n indicates the status function as follows:
Bit Off/On Hex Decimal Status
0
Off 00 0 Drawer kick-out connector pin 3 is LOW.
On 01 1 Drawer kick-out connector pin 3 is HIGH.
1-3 — — — Undefined.
4 Off 00 0 Not used. Fixed to Off.
5, 6 — — — Undefined.
7 Off 00 0 Not used. Fixed to Off.
Number of
Remaining Dots
Cut- Sheet Status
Hex Decimal
0 - 8 00H 0
9 - 17 01H 1
18 - 26
•
•
•
117 - 125
02H
•
•
•
0DH
2
•
•
•
13
126 - 134 0EH 14
135 and up 0FH 15
n Function
1 Transmit printer status
2 Transmit off-line status
3 Transmit error status
4 Transmit paper roll sensor status