Specifications

Programmer's Guide POSjet
®
1500 Codes and Commands
Nov-10 Rev N Page 57
Electronic
Journal
This allows the partition of the extended flash to
be split between the electronic journal and the
user store. If the electronic journal is in use, this
feature can not be changed.
64K to
Electronic
Journal
The configuration depends on the
amount of flash installed.
EJ Print
Enable
There is a manual means to print the electronic
journal. This feature may be disabled by this
option. If the print is disabled, the only way to
retrieve the EJ information is through the host.
Enabled
EJ Print
Separator
By default the printer will print a record
separator between journal records. This may be
disabled by this option.
Enabled
Options
Cutter Option
Specifies that the cutter option is attached.
Not present or disabled
Active
Knife Pre-Cut
Feed
or
Tear Off
adjustment
The printer can be configured to feed from 0 to
26 mm of paper before the paper is cut.
If the auto cutter is not installed this value
becomes the tear point adjustment.
Off
May be from 0 to 22mm.
Table 16 Configurable Options
Note: There may be additional options and/or features that appear in the configuration list. If you wish to alter any
of these undocumented features you should call Transact Technical support for assistance.