Specifications

Control Codes POSjet
®
1500 Programmer's Guide
Page 42 Rev N Nov-10
Preventing and Clearing Validation Jams
Inserted forms should not be touched during the printing, or ejection process. Pressing or pulling the paper during
ejection may cause the validation process to jam. If a jam condition occurs, clear it as described below:
Removing a Validation Jam
If a validation jam occurs, and the top of the form is still visible in the form insertion area, remove the form by
simply pressing and holding the FEED Button. If the top of the form is not visible in the form insertion area, it can
be removed manually.
Removing a Validation Jam Manually
1. Open the printer‘s front cover.
2. Insert your index finger underneath the ink carriage and evenly pull the form out toward you until it is
completely removed from the printer.
3. Close the printer‘s covers and resume operation.