Specifications

Control Codes POSjet

1500 Programmer's Guide

Page 30 Rev N Nov-10

Paper Low Adjustment Requirements

Use the following table to decide how much paper you want to remain after paper low sensing has occurred.

TransAct‘s expected results are based on paper and paper roll with these specifications. Refer to ―Paper and Core

Diameter‖ on page 15 for paper measurements.

Paper Low Adjustment Settings

Approximate Paper

Remaining (in feet)

Paper Roll Diameter

UPPER LIMIT: 3 turns (counter clockwise)

24'

1.420" (36mm)

2 turns (counter clockwise)

22'

1.375" (34.9mm)

1 turns (counter clockwise)

16‟

1.250" (31.7mm)

FACTORY SETTING

12'

1.175" (29.8mm)

1 turn (clockwise)

1.050" (26.6mm)

2 turns (clockwise)

3.5'

.950" (24.1mm)

LOWER LIMIT: 3 turns (clockwise)

1.25'

.885" (22.4mm)

Table 11 Paper Low Setup