Specifications

Control Codes POSjet
®
1500 Programmer's Guide
Page 26 Rev N Nov-10
Connecting the Cash Drawer
The POSjet
®
1500 printer can be configured to operate with cash drawers designed to work with printers from
different manufacturers. This configuration is preset at the factory and is identified by means of a label affixed to the
bottom of the printer. The POSjet
®
1500 currently supports Ithaca, Epson, and Star compatible cash drawers.
CAUTION: The printer and cash drawer configurations must be the same to ensure proper operation. If the label is
missing or does not match your cash drawer configuration, refer to ―Verify the Cash Drawer Interface‖ on page 36.
Connecting Cash Drawer Cable to the Printer
1. Disconnect all power from the printer and host system or personal computer.
2. Orientate the printer so you are looking at the rear underside of the unit and locate the small Cash Drawer
Connector to the left of the Communication Connector.
3. Connect the Cash Drawer Cable to the connector located on the back of the printer, making sure that the Cash
Drawer Cable snaps into place.
Figure 16 Connecting the Cash Drawer Cable