Specifications

Programmer's Guide POSjet
®
1500 Data Processing and
Communications
Nov-10 Rev N Page 243
Function: Set Validation Operation
ASCII: [ESC] ~ 0 <n>
Hex: 1BH 7EH 30H
Decimal: <27><126><48>
Description: This command reconfigures the operation of the right form sensor during validation.
Where n = 76543210 Bit values
xxxxxx00 Right form sensor is required for the form to be sensed and must be valid when
the form is fully loaded.
xxxxxx01 Right form sensor is not required for the form to be sensed but must be valid
when the from is fully loaded.
xxxxxx10 Right form sensor is not used.
xxxxxx11 Reserved.
Note: This command remains in effect until it is reset by a power cycle. It does not alter the default
configuration.