Specifications

EPOS Control Codes POSjet
®
1500 Programmer's Guide
Page 238 Rev N Nov-10
Function Print single user-defined bit-image EPOS ONLY
ASCII GS / <m>
Hexadecimal 1DH 2FH <m>
Decimal <29> <47> <m>
Description The GS / <m> command prints a downloaded or stored bit-image using the mode specified by
<m>. <m> selects a mode from the table below.
Hex
Decimal
Mode
Vertical Dot Density
(dpi)
Horizontal Dot
Density (dpi)
00
0
Normal
203
203
01
1
Double-wide
203
101
02
2
Double-high
101
203
03
3
Quadruple
101
101
Table 67 User-defined Bit-image Resolutions
Function Save User-Defined Character Set EPOS ONLY
ASCII GS 6 <Name..> <0>
Hexadecimal 1DH 36H <Name..> 0H
Decimal <29> <54> <Name..> <0>
Range <Name> = a 15-byte maximum alphanumeric name to identify the image.
Description GS 6 <Name..> <0> saves the current character set created by the [ESC] & command to the
nonvolatile memory pool. If no character set has been defined, the command stores an empty
definition structure.
Function Select User-Defined Character Set EPOS ONLY
ASCII GS 7 <Name..> <0>
Hexadecimal 1DH 37H <Name..> 0H
Decimal <29> <55> <Name..> <0>
Range <Name..> = a 15-byte maximum alphanumeric name to identify the image.
Description GS 7 <Name..> <0> selects a previously saved user-defined character set. If the character set does
not exist, the command is ignored.
Function Query Nonvolatile Memory Pool Information EPOS ONLY
ASCII GS 3
Hexadecimal 1DH 33H
Decimal <29> <51>
Description The GS 3 command prints a summary of the user-store usage. It is intended to help with the
generation and maintenance of user store.
Note 1 The report is printed as part of the configuration report.