Specifications

Programmer's Guide POSjet
®
1500 EPOS Control Codes
Nov-10 Rev N Page 233
Function Enter Test Mode
ASCII [GS] ( A <2> <0> <n> <m>
Hexadecimal 1DH 28H 41H <2> <0> <n> <m>
Decimal <29> <40> <65> <2> <0> <n> <m>
Description This command places the printer into test mode based on the parameters <n> and <m>.
Where <n> may be 0, 1, 2, 48, 49, or 50. It is intended to select the print station. The POSjet
®
will accept any
of these values
Where <m> 1 or 49 Selects Hex Dump mode. You must press the * Button to exit this mode
2 or 50 Selects Printer configuration print out.
3 or 51 Selects Rolling ASCII test pattern. You must press * Button to exit this mode.