Specifications

EPOS Control Codes POSjet
®
1500 Programmer's Guide
Page 218 Rev N Nov-10
Function Set Right Margin EPOS ONLY
ASCII [ESC] Q <n>
Hexadecimal 1BH 51H <n>
Decimal <29> <81> <n>
Range 0 n 255
Description The [ESC] Q <n> command sets the right margin using <n>. The right margin is set to <n>
characters from the beginning of the line.
Function Return Home
ASCII [ESC] <
Hexadecimal 1BH 3CH
Decimal <27> <60>
Description The [ESC] < command moves the print head to the home position.
Bit-Image Commands
Function Select Bit-Image Mode
ASCII [ESC] * <m> <nl> <nh> <dl> … <dk>
Hexadecimal 1BH 2AH <m> <nl> <nh> <dl> … <dk>
Decimal <27> <42> <m> <nl> <nh> <dl> … <dk>
Range <m> = 0, 1 in TM U325D 0, 1, 32, 33 in EPOS mode
0 nl 255
0 nh 3
0 d 255
k = nl + nh x 256 for <m> = 0 or 1
k = (nl + nh x 256) * 3 for <m> = 32 or 33
Description [ESC] * <m> <n
l
> <n
h
> <d
l
> … <d
k
> command selects a bit-image mode using <m> for the
number of dots specified by (n
l
+ n
h
x 256) in mode 0 or 1 and (n
l
+ n
h
x 256)*3 in mode 32 or 33
and <d> indicates the bit image data. Set a bit to one to print a dot, or set a bit to zero to not print
a dot. Use the command to print a predefined picture or logo. The modes selectable by <m> are
listed below.
<m>
Mode
Vertical Direction
Horizontal Direction
Dot Density
Number
of Dots
Dot Density
Number
of Dots
0
8-dot single density
96 dpi
8
80 dpi
200
1
8-dot double density
96 dpi
8
160 dpi
400
32
24 dot single density
96 dpi
24
120 dpi
300
33
24 dot double density
192 dpi
24
240 dpi
600
Table 50 Print Density Selection