Specifications

EPOS Control Codes POSjet
®
1500 Programmer's Guide
Page 212 Rev N Nov-10
Function Turn ON/OFF Double-Strike Mode
ASCII [ESC] G <n>
Hexadecimal 1BH 47H <n>
Decimal <27> <71> <n>
Range 0 n 255
Description The [ESC] G <n> command turns on or off double-strike mode. When the least significant bit
(LSB) of <n> = 1, double-strike mode is turned on; when it is 0, double-strike mode is turned off.
The default setting is <n> = 0. Double-strike and emphasized printing appear the same.
Function Turn ON/OFF Upside-Down Print Mode
ASCII [ESC] { <n>
Hexadecimal 1BH 7BH <n>
Decimal <27> <123> <n>
Range 0 n 255
Description The [ESC] { <n> turns on or off upside-down printing mode. When the least significant bit of
<n> = 1, upside-down printing mode is turned on; when it is 0, upside-down printing mode is
turned off. The default setting is <n> = 0. When upside-down mode is turned on, the printer
prints 180 rotated characters from right to left. The line printing order is not reversed, so the
order of the data transmitted is important. The command is enabled only when input at the
beginning of a line.
Function Turn ON/OFF 90° Rotation Mode EPOS ONLY
ASCII ESC V <n>
Hexadecimal 1BH 56H <n>
Decimal <27> <86> <n>
Range <n> = 0, 1, 2, 48, 49, 50
Description The ESC V <n> command turns on/off 90° clockwise rotation mode. The command is only
enabled in standard mode. In page mode, an internal flag is activated, and the command is
enabled when the printer returns to standard mode.
<n>
Function
0, 48
Turns off all rotation modes
1, 49
Turns on 90° clockwise rotation mode
2, 50
Turns on 90° counterclockwise rotation mode
Table 47 Rotation Modes